 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Low Noise Amplifier 1400 - 2000 MHz Features * * * * * Low Noise Figure: 1.6 dB High Input IP3: -6 dBm at 3 V, 6.5 mA bias High Gain: 18 dB Single Supply: +3 to +8 VDC Adjustable current: 3 to 20 mA with external resistor * SOT-26 Plastic Package AM50-0006 V3 Functional Block Diagram Description M/A-COM's AM50-0006 is a high dynamic range, GaAs MMIC, low noise amplifier in a SOT-26 surface mount plastic package. It employs external input matching to obtain optimum noise figure performance and operating frequency flexibility. The AM50-0006 also features flexible biasing to control the current consumption vs. dynamic range trade-off. The AM50-0006 can operate from any positive supply voltage in the 3 V to 8 V range. Its current can be controlled over a range of 3 mA to 20 mA with an external resistor. The AM50-0006 is ideally suited for use where low noise figure, high gain, high dynamic range, and low power consumption are required. Typical applications included receiver front ends in PDC1500, DCS-1800, DCS-1900 and other PCN/PCS applications. It is also useful as a gain block, buffer, driver, and IF amplifier in both fixed or portable PDC, PHS, and PCN/PCS systems. The AM50-0006 is fabricated using a low-cost 0.5-micron gate length GaAs process. The process features full passivation for increased performance and reliability. The AM50-0006 is 100% RF tested to ensure performance specification compliance. Pin Configuration Pin No. 1 2 3 4 5 6 Pin Name GND REXT CEXT RF Input VDD GND RF Output Description RF and DC Ground External Current Control By-Pass Capacitor RF Input of the amplifier Positive supply voltage RF and DC Ground RF Output of the amplifier Ordering Information 1 Part Number AM50-0006 AM50-0006TR AM50-0006PDC AM50-0006PCS Package SOT-26 Plastic Package Forward Tape and Reel 1400-1520 MHz Designer's Kit 1700-2000 MHz Designer's Kit 1. Reference Application Note M513 for reel size information. 1 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. * North America Tel: 800.366.2266 / Fax: 978.366.2266 * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. Low Noise Amplifier 1400 - 2000 MHz Electrical Specifications2: TA = +25C, Z0 = 50 , Pin = -30 dBm Parameter Gain Noise Figure Input VSWR Output VSWR Output 1 dB Compression Input IP3 Reverse Isolation Drain Current AM50-0006 V3 Test Conditions VDD = 3 Volts VDD = 3 Volts -- -- VDD = 3 Volts VDD = 3 Volts -- VDD = 3 Volts Units dB dB Ratio Ratio dBm dBm dB mA 1500 MHz Min. 15 -- -- -- -- -- -- 4.5 1900 MHz Max. 20 2.00 -- -- -- -- -- 10 Typ. 18 1.60 2.2:1 1.5:1 1 -5.0 35 6.5 Min. 15 -- -- -- -- -- -- 4.5 Typ. 17.5 1.65 1.5:1 1.5:1 0 -6.0 35 6.5 Max. 20 2.00 -- -- -- -- -- 10 2. Using external 120 ohm resistor. See Functional Schematics. Absolute Maximum Ratings 3,4 Parameter VDD Input Power Current 5 6 SOT-26 Absolute Maximum +10 VDC +17 dBm 30 mA +150C -40C to +85C -65C to +150C Channel Temperature 02XY Operating Temperature Storage Temperature 3. Exceeding any one or combination of these limits may cause permanent damage to this device. 4. M/A-COM does not recommend sustained operation near these survivability limits. 5. When pin #2 is used to increase current (see note 8). 6. Thermal resistance (jc) = +150C/W. Handling Procedures Please observe the following precautions to avoid damage: Meets JEDEC moisture sensitivity level 1 requirements. Static Sensitivity Gallium Arsenide Integrated Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. 2 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. * North America Tel: 800.366.2266 / Fax: 978.366.2266 * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. Low Noise Amplifier 1400 - 2000 MHz Data for 1700 - 2000 MHz Operation Functional Schematic Input Reflection Coefficient Frequency in (mag) AM50-0006 V3 1700 MHz 0.699 48.47 1850 MHz 0.674 38.68 2000 MHz 0.649 29.27 in (ang) External Circuitry Parts List 7 Part C1 C2 L1 L2 Pin 1 Value 47 pF 470 pF 2.7 nH 22 nH See note 8 470 pF Purpose DC Block By-Pass Tuning RF Choke Current control By-Pass Recommended PCB Configuration Layout View R1 C3 7. All external circuitry parts are readily available, low cost surface mount components (.060 in. x .030 in. or .080 in. x .050 in.) 8. Pin 2 allows use of an external resistor to ground for optional, higher current. For IDD ~ 5 mA, R1 = 150 ohms; IDD ~ 6.5 mA, R1 = 120 ohms; IDD ~ 20 mA, R1 = 27 ohms. Cross Section View The PCB dielectric between RF traces and RF ground layers should be chosen to reduce RF discontinuities between 50 lines and package pins. M/A-COM recommends an FR-4 dielectric thickness of 0.008" (0.20 mm) yielding a 50 line width of 0.015" (0.38 mm). The recommended RF metalization thickness is 1 ounce copper. 3 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. * North America Tel: 800.366.2266 / Fax: 978.366.2266 * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. Low Noise Amplifier 1400 - 2000 MHz Typical Performance Curves, 1700 - 2000 MHz Gain vs. Bias @ +25C 22 AM50-0006 V3 Input IP3 vs. Bias @ +25C 10 5 V, 20 mA 3 V, 6.5 mA 3 V, 5 mA 20 5 18 0 16 14 5 V, 20 mA 3 V, 6.5 mA 3 V, 5 mA -5 12 1.7 1.8 1.9 2.0 2.1 2.2 -10 1.7 1.8 1.9 2.0 Frequency (GHz) Frequency (GHz) Noise Figure (Bias = 3V, 6.5 mA) 2.5 3 V, 6.5 mA VSWR (Bias = 3V, 6.5 mA) 3.0 Input VSWR Output VSWR 2.5 2.0 2.0 1.5 1.5 1.0 1.7 1.8 1.9 2.0 2.1 2.2 1.0 1.7 1.8 1.9 2.0 2.1 2.2 Frequency (GHz) Frequency (GHz) Output P1 dB vs. Bias @+25C 10 Input IP3 vs. Drain Current (Frequency = 1900 MHz) 10 5V 3V 5 5 V, 20 mA 3 V, 6.5 mA 3 V, 5 mA 5 0 0 -5 -5 -10 1.7 -10 1.8 1.9 2.0 5 10 15 20 Frequency (GHz) Drain Current (mA) 4 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. * North America Tel: 800.366.2266 / Fax: 978.366.2266 * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. Low Noise Amplifier 1400 - 2000 MHz Typical Performance Curves, 1700 - 2000 MHz Gain vs. Temperature (Bias = 3V, 6.5 mA) 22 +25C +85C -40C AM50-0006 V3 Noise Figure vs. Temperature (Bias = 3V, 6.5 mA) 3.0 +25C +85C -40C 20 2.5 18 2.0 16 1.5 14 1.0 12 1.7 1.8 1.9 2.0 2.1 2.2 0.5 1.7 1.8 1.9 2.0 2.1 2.2 Frequency (GHz) Frequency (GHz) 5 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. * North America Tel: 800.366.2266 / Fax: 978.366.2266 * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. Low Noise Amplifier 1400 - 2000 MHz Data for 1400 - 1520 MHz Operation Functional Schematic External Circuitry Parts List9 Part C1 C2 L1 L2 L3 R1 C3 9. AM50-0006 V3 Value 47 pF 470 pF 10 nH 3.9 nH 22 nH See note 10 470 pF Purpose DC Block By-Pass Tuning Tuning RF Choke Current control By-Pass All external circuitry parts are readily available, low cost surface mount components (.060 in. x .030 in. or .080 in. x .050 in.) 10. Pin 2 allows use of an external resistor to ground for optional, higher current. For IDD ~ 5 mA, R1 = 150 ohms; IDD ~ 6.5 mA, R1 = 120 ohms; IDD ~ 20 mA, R1 = 27 ohms. Recommended PCB Configuration Layout View Pin 1 Cross Section View The PCB dielectric between RF traces and RF ground layers should be chosen to reduce RF discontinuities between 50 lines and package pins. M/A-COM recommends an FR-4 dielectric thickness of 0.008" (0.20 mm) yielding a 50 line width of 0.015" (0.38 mm). The recommended RF metalization thickness is 1 ounce copper. 6 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. * North America Tel: 800.366.2266 / Fax: 978.366.2266 * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. Low Noise Amplifier 1400 - 2000 MHz Typical Performance Curves, 1400 - 1520 MHz Gain vs. Bias @ +25C 22 AM50-0006 V3 Input IP3 vs. Bias @ +25C 10 5 V, 20 mA 3 V, 6.5 mA 3 V, 5 mA 20 5 18 0 16 -5 14 5 V, 20 mA 3 V, 6.5 mA 3 V, 5 mA 12 1.30 1.35 1.40 1.45 1.50 1.55 1.60 -10 1.35 1.40 1.45 1.50 1.55 Frequency (GHz) Frequency (GHz) Noise Figure (Bias = 3V, 6.5 mA) 2.5 3 V, 6.5 mA VSWR (Bias = 3V, 6.5 mA) 3.0 Input VSWR Output VSWR 2.5 2.0 2.0 1.5 1.5 1.0 1.35 1.40 1.45 1.50 1.55 1.0 1.30 1.35 1.40 1.45 1.50 1.55 1.60 Frequency (GHz) Frequency (GHz) Output P1 dB vs. Bias @+25C 15 5 V, 20 mA 3 V, 6.5 mA 3 V, 5 mA Input IP3 vs. Drain Current (Frequency = 1500 MHz) 10 5V 3V 10 5 5 0 0 -5 -5 1.35 1.40 1.45 1.50 1.55 -10 5 10 15 20 Frequency (GHz) 7 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. Drain Current (mA) * North America Tel: 800.366.2266 / Fax: 978.366.2266 * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. Low Noise Amplifier 1400 - 2000 MHz Typical Performance Curves, 1400 - 1520 MHz Gain vs. Temperature (Bias = 3V, 6.5 mA) 22 +25C +85C -40C AM50-0006 V3 Noise Figure vs. Temperature (Bias = 3V, 6.5 mA) 3.0 +25C +85C -40C 20 2.5 18 2.0 16 1.5 14 1.0 12 1.30 1.35 1.40 1.45 1.50 1.55 1.60 0.5 1.35 1.40 1.45 1.50 1.55 Frequency (GHz) Frequency (GHz) 8 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. * North America Tel: 800.366.2266 / Fax: 978.366.2266 * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. |
Price & Availability of AM50-00061
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |